Sunday 9 November 2014

Quasar Innovative Solutions    
Presenting   
Air Conditioner + Light Controlling System.

AC consume Approx 
2 Unit / Hour , 
18 - 20 Unit / Day ,   
600 Units / Month , 
7200 Units / Year ,  

Normally AC consume 80% of electricity of total consumption.Using this product it will be reduced to 30% to 50%.



How it works : 

Room will remain cool only when some one is present inside.All operations are automatic.

Best use for Office cabins , Corporate centralized AC , All lighting n Fans , Building passages.

If you want to know your electricity consumption and you want to reduced it by 40-50%. Call us for Energy Audit for your home n  office.
Charges : 500/- (Charges depends on Location )














If you wanted to reduced your electricity bill , Must use this product & Save Money......

For more details 
Contact : 7769941114 , 9175140881 , 9224445889
Quasar Innovative Solutions.
                                          Passion to Innovate..  
www.quasarinnovative.com

Monday 3 November 2014


PIR SENSOR:
Quasar Innovative Solutions Presents PIR SENSOR 


FOR AUTOMATIC SWITCHING ON / OFF OF LIGHTING AND OTHER LOADS IN A ROOM BASED ON PRESENCE OR OTHERWISE.
PIR sensor switch detects Infrared Rays released by human body in motion within the detection area, and SWITCH ON the laod (lights/fans/a.c.)when somebody is present and switch off the same, after pre selected delay period, when nobody is present. This unit is suitable for indoor / outdoor use(rooms, corridors, staircases etc.). Suitable models for out door use is also available.

Technical Data
  1. Voltage : 230V AC,50 Hz
  2. Load Wattage : Max.1000W Incandescent Bult,max.300W Fluorescent Lamp.
  3. Detection Area: Max. 14 meters
  4. Detection Angle: Max. 120 0
  5. Time-delay : From(10±5)seconds to (4±1)minutes adjustable
  6. LUX Control Level : From daytime to darkness adjustable.
  7. The detector is more sensitive to motion across the front of the sensor than to motion towards or away from the sensor.
  8. To get optimum performance, the unit is suggested to be installed 1.8 to 2.5 meters high(above the ground to be detected)