FOR
AUTOMATIC SWITCHING ON / OFF OF LIGHTING AND OTHER LOADS IN A ROOM
BASED ON PRESENCE OR OTHERWISE.
PIR
sensor switch detects Infrared Rays released by human body in motion
within the detection area, and SWITCH ON the laod
(lights/fans/a.c.)when somebody is present and switch off the same,
after pre selected delay period, when nobody is present. This unit is
suitable for indoor / outdoor use(rooms, corridors, staircases etc.).
Suitable models for out door use is also available.
Technical
Data
- Voltage : 230V AC,50 Hz
- Load Wattage : Max.1000W
Incandescent Bult,max.300W Fluorescent Lamp.
- Detection Area: Max. 14 meters
- Detection Angle: Max. 120 0
- Time-delay :
From(10±5)seconds to (4±1)minutes adjustable
- LUX Control Level : From
daytime to darkness adjustable.
- The detector is more
sensitive to motion across the front of the sensor than to motion
towards or away from the sensor.
- To get optimum performance,
the unit is suggested to be installed 1.8 to 2.5 meters high(above the
ground to be detected)
|
|
No comments:
Post a Comment